Run a Wingbits ADS-B Feeder (Earn $WINGS From Flight Data)
SDR + antenna + one Docker command — contribute cryptographically-secure aircraft data and earn $WINGS on Solana.
1. What you need
Wingbits rewards $WINGS for live ADS-B aircraft data. Hardware is the lowest barrier of any node on our index:
| Item | Cost | Notes |
|---|---|---|
| Raspberry Pi 4/5 (or any always-on box) | $50–80 | Docker required |
| RTL-SDR dongle | ~$30 | FlightAware Pro Stick or similar |
| Antenna | $20–100 | Outdoor placement dramatically improves coverage |
| Total | ~$100–200 | One-time cost |
Coverage quality drives rewards — antenna placement matters more than compute.
2. Set up the receiver
1. Flash your Pi with a recent OS (Raspberry Pi OS Lite works great).
2. Install Docker.
3. Plug in the SDR dongle and antenna, ideally near a window or outdoors.
4. Verify the dongle is detected (lsusb / rtl_test).
3. Run the Wingbits feeder
Follow the official Docker install guide at docs.wingbits.com/installation/docker. The general shape:
# register your receiver on wingbits.com first to get your feeder key
# then run the official feeder container (exact image from the docs)
docker run -d --restart unless-stopped \
--name wingbits-feeder \
-e WINGBITS_KEY=YOUR_FEEDER_KEY \
--device /dev/bus/usb \
wingbits/feeder:latest4. Verify your feed & coverage
1. Check the Wingbits dashboard — your receiver should show as online with a coverage map.
2. Confirm aircraft are being decoded (the container logs show message counts).
3. Optimize antenna placement for more coverage — more validated data = more $WINGS.
# quick health check:
docker logs --tail 20 wingbits-feeder | grep -iE "message|error|online"5. Monitor & withdraw
- Rewards accrue in $WINGS on Solana to your registered wallet.
- Track feed uptime and quality in the dashboard; keep the feeder online 24/7.
- $WINGS is early-stage — convert periodically per your tax strategy and don't over-concentrate.
Tools used in this playbook
- Wingbits — ★★★½☆ 3.5/5